Disassembly And Reassemble; Disassembly - Samsung QE49Q8 Series Service Manual

3. Disassembly and Reassemble

This section of the service manual describes the disassembly and reassembly procedures for the product.
1. Disconnect the product from the power source before disassembly.
2. Follow these directions carefully.
- Use the Samsung Open Jig and Cushion to remove the Rear Cover.
•
CAUTION
- Recommended Torque for Cabinet/Stand screws : 10 ~ 12kgf
•

3-1. Disassembly

10-10
Carefully position the product so that the screen is facing downwards. Make sure to place
the product upon a soft cushion or any material that will prevent damage to the screen.
2
Loosen 4 screws and detach Center stand.
Open Jig Tool, Protection Cushion (curved models Only)
A strength of Torque can be changed depending on the situation.
3. Disassembly and Reassemble
Remark
Remark
3-1