6
Remove the Main Board, LD Board and SMPS Board pushing to the arrow direction.
•
Before Removing SMPS board
- You have to discharge the SMPS by using Discharge Tool
- If LED ON LED OFF, Discharge is completed.
6-1
Removing SMPS board
•
Remove all connections then Gently lift up (Top Left corner) to release the lock
•
Slide to the right to release the board
NOTE: When Installing the SMPS Board make sure its properly set in all
9
mounting slots and fully locked into position.
3. Disassembly and Reassemble
Remark
Remark
3-5