Advertisement
After-Cleaning Care
Go to BISSELL.com for how-to videos.
1.
2.
Empty dirty water tank
Remove dirty water tank
when water reaches the
and carry to disposal area.
"FULL" line
4.
5.
Remove lid and pour out
Replace the tank lid and
dirty water. Rinse out tank to
rotate the handle forward to
remove any debris.
lock back into place.
7.
8.
Remove tool from end of
Remove and rinse the tools
hose. Press the tool nozzle
under clean, running water.
release button to clean further.
Allow tools to dry.
Note: Select tool nozzles can
be removed.
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect from electrical outlet before
performing maintenance or troubleshooting.
6 BISSELL.com
3.
Unlock by rotating the
handle up and over the back of
the tank.
6.
Before placing tank back
into the machine, remove any
debris from the red filter.
9.
Wrap and secure the flex
hose and power cord.
Storing Your Machine
Store machine in protected, dry area at room temperature (40° F - 110° F).
Troubleshooting
If you don't see the issue you're experiencing below, visit BISSELL.com.
Problem
Possible Cause
Clean water tank may be empty.
Clean water tank may not be
Reduced/
completely seated.
no spray
Pump may have lost prime.
Tanks may not be completely seated.
Loss of
suction
power
Dirty water tank is full.
NOTICE
To reduce the risk of a leaking condition, do not store where freezing may occur. Damage to internal
components may result.
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect from electrical outlet before
performing maintenance or troubleshooting.
Remedies
Refill tank.
Turn power OFF. Remove and reseat tank.
Hold end of hose below water level in tank
to prime.
Turn power OFF. Remove and reseat both
tanks.
Empty tank.
BISSELL.com 7
Advertisement
