Table of Contents
Advertisement
Intelligent dosing system
15 Intelligent dosing sys-
tem
The optimum quantities of liquid de-
Intelligent dosing system
tergent and fabric softener are dis-
pensed automatically depending on
the programme and settings.
15.1 Filling the dispenser
Note
In order to use intelligent dosing, fill
the dispenser.
¡ Fill the dispenser only with suitable
detergent and care products
→ Page 37.
¡ If you change the liquid detergent
or fabric softener, empty and clean
the dispenser beforehand.
→ "Cleaning the detergent drawer",
Page 50
¡ If you want to use both dispensers
for liquid detergent, adjust the con-
tents of the dispenser → Page 43.
Requirement: /
Pull out the detergent drawer.
1.
Open the dispenser lid.
2.
flashes.
Intelligent dosing system en
Pour liquid detergent
3.
softener
into the relevant dis-
pensers.
→ "Detergent drawer", Page 20
Close the dispenser lid.
4.
Note: To prevent the detergent
from drying out or drying up, do
not leave the dispenser lid open
for a long period of time.
Push in the detergent drawer.
5.
Adjust the basic dosage
6.
→ Page 44.
15.2 Dispenser contents
Notes
¡ If you change the content of the
dispenser, the basic dosage for
this dispenser is reset.
¡ If you use both dispensers for li-
quid detergent, you must select a
dispenser which is to be used dur-
ing washing.
Adjusting the dispenser contents
Press and hold T2 i-DOS for ap-
1.
prox. 3 seconds.
To set , press T2 i-DOS.
2.
a The display shows .
To set
, press T2 i-DOS again.
3.
To end the setting process, wait
4.
briefly.
and fabric
43
Advertisement
Table of Contents
