Clean print belt
Clean print belt
Clean the inner side of the print belt
When the inner side of the print belt is dirty, a message on the dashboard and the orange
maintenance key symbol appear. Clean the inner side of the print belt within 12 hours after the
control panel shows the message.
[538] Location of the print module
Before you begin
You need the following items:
• You need to have the rights to access the maintenance tasks and the configuration settings.
• You need the cleaning plate and print belt cleaning cloths.
• You need a bottle with process maintenance liquid (PML).
NOTE
• In order to keep your hands clean, it is advised to use nitrile gloves when you work with ink,
MICR ink, and PML. For details see the related safety data sheets. (
consumables on page
• When you spill any liquid, wipe up the drops with disposable towels and transfer the used
towels to a sealable container appropriate for disposal.
Procedure
It is important that you perform the procedure in the exact order as listed below.
484
Chapter 13 - Maintain the printer
The printer notices that maintenance is needed.
426)
VarioPrint i-series
VarioPrint i-series MICR