Table of Contents
Advertisement
[49] The status bar on the dashboard (1), the control panel (2) and the operator attention light (3)
Color
Schedule
The schedule is the daily up to eight-hour plan board of the control panel and PRISMAsync
Remote Manager. It shows the list of scheduled jobs and predicts the job production time.
Furthermore, you read the upcoming events: loading paper trays or removing prints from the
output trays.
• Green means that the media and the output location are available
• Gray means that the availability of the media and output location is unknown. This occurs
when the printer is in transaction printing mode or for streaming jobs.
• Orange means that the operator is needed within the specified time to load media or remove
prints.
• Yellow means that the printer cannot determine the filling level in the paper trays or in the
output location. This can occur when the thickness of the media is unknown or when prints are
folded.
• Red means that the operator is needed to load media or to remove prints.
VarioPrint i-series MICR
Action required
Green informs that there is no upcoming event.
Orange warns that there is an upcoming event, such as loading paper trays or re-
moving prints from the output trays.
Red warns that you must perform an action immediately because the printer no
longer can print. The following actions can be needed:
1. Load media.
2. Remove prints.
3. Replace containers.
4. Replace tissue ribbon cassettes.
5. Replace waste containers.
6. Remove sheets from the system tray or the sentry tray.
7. Solve a paper jam.
Learn about the printer status
Chapter 4 - Getting started
63
Advertisement
Table of Contents
