Onboard Parallel Port; Epp Version; Parallel Port Mode - MSI MICRO ATX AL12 User Manual

CHAPTER 3 CHAPTER 3 CHAPTER 3 CHAPTER 3 CHAPTER 3

Onboard Parallel Port

Choose Auto, for the BIOS to automatically assign the onboard
parallel port to the available parallel port or disabled.
If the ISA add-on card has
LPT1
I/O:378H I/O:278H
X
X
X
X
Note: If the onboard parallel port interrupt and ISA add-on card interrupt are
in conflict, the parallel port will not work properly. Please disable one of
the devices.

EPP Version

This option is for setting which EPP version will be used. The
settings are 1.7 and 1.9.

Parallel Port Mode

This option allows user to choose the operating mode of the
onboard parallel port. The settings are Normal, SPP/EPP or ECP mode.
LPT2 LPT3
I/O:3BCH
X
X
X X
X
X
X X
®
AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE
AMI AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE BIOS USER'S GUIDE
Onboard parallel port to be set as
PORT
ASSIGNED
Disabled
LPT3
LPT2
LPT1
LPT2
LPT1
LPT1
LPT1
3-13
IRQ
ASSIGNED
X
5
5
7
5
7
7
7