Operating Limits; Handling - Trane CXAO Installation Operation & Maintenance

Operating limits

2.5 Operating limits
2.5.1 Storage
The units can be stored within the following
environmental conditions:
Min ambient Temperature
Max ambient Temperature
Max Relative Humidity
WARNING! Storage at temperatures below the
minimum specifi ed can cause damage to some parts
including the electronic controller and its LCD display.
Storage at temperatures above the maximum indicated
causes the opening of the safety valves placed on the
suction line of compressors.
The storage in a condensed atmosphere can damage
electronic components.
Make sure that during transport the goods do not arrive in positions not provided. Horizontal
positioning of the unit can lead to irreversible damage to the compressors. Damage arising
from incorrect transport will not be under warranty by the manufacturer. Immediately report an
incorrect receipt of goods. An arrow positioned upward, indicating the vertical position of the unit.
WARNING! The lifting ropes and the spreader bar and/or balance must be sized to hold the weight of the unit
safely. Check the weight of the unit on the nameplate of the unit. The weights given in the tables "Technical data"
in "General Information" refer to standard units, without any options. The unit may have specifi c accessories that
increase the overall weight (pumps, copper / copper, etc..).
WARNING! The unit must be lifted with the utmost attention and care. Avoid abrupt lifting.
8
: -10°C
: 53°C
: 95% not condensable
2.5.2 Operation
Operation of the units is permitted within the limits
indicated in the product catalog. These operating limits
apply to unit operating at full load.
WARNING! Operation outside the limits specifi ed may
cause the operation of the protections and disrupt
operation of the unit and, in extreme cases, damage the
unit.
In case of doubt, consult the factory.
2.6

Handling

Check the weight of the unit and the ability to load the
lifting device. Be careful of obstacles placed in the path
that may damage the units/ (bumps, ramps, hills, etc...)
Verify the perfect
stability during
handling of
the unit. Do
not perform
d a n g e r o u s
operations that
could damage the
unit.
Lifting holes
RF-SVX003A-GB