Trane CXAO Installation Operation & Maintenance page 13

Installation
WARNING!
Do not use forklift trucks to lift the unit from below.
If equipment for lifting from above is not available, use
rollers to move the unit.
The surface on which the unit is placed must be fl at and
strong enough to withstand the weight of the unit while
running.
In order to reduce the transmission of vibrations
to the supporting structures, fi t shock absorbers in
every fastening point. Rubber shock absorbers are
recommended for units installed on the ground, spring
shock absorbers for units installed on roofs. Open spaces
around the unit must be provided for in order to allow
for the passage of necessary airfl ow and in order to
allow normal maintenance to be carried out (as shown
on general catalogues).
NOTE: if two units have to be installed side by side, the
distance must be doubled.
RF-SVX003A-GB
13