Sunbeam Mixmaster HeatSoft MXM7000WH User Manual page 9

Using your Mixmaster
To attach bowl
1. Lift the Tilt Release Lever and tilt mixer
head back.
2. Place bowl on bowl locking plate.
3. Turn bowl gently in a clockwise direction
so that bowl handle are perpendicular
to base.
4. Plug your mixer into the mains supply
socket.
To remove bowl
1. Lift the Tilt Release Lever and tilt mixer
head back.
2. Turn bowl counter clockwise and lift off
locking plate.
HeatSoft
® TM
To install attachments
1. Ensure the Control Dial is in the off
position.
2. Lift the Tilt Release Lever and tilt mixer
head back.
3. Align the key positions of the beater
shaft and attachment, push upward.
4. Twist counter clockwise so that pin
aligns with attachment notch and clicks
into position.
To remove attachments
1. Ensure the Control Dial is in the off
position.
2. Lift the Tilt Release Lever and tilt mixer
head back.
3. Press attachment upward as far as
possible and turn clockwise.
4. Pull attachment from beater shaft.
NOTE: It is recommended to scrape food off
attachment with a spatula/scraper
before removing.
Planetary Mixer
7