Advertisement
• The time zone abbreviation will appear in the LCD.
NOTE: The default (factory) time zone setting is Eastern time zone.
• Press and release the "AL/HR" button to select the desired time zone.
• Press and release the "Snooze" button twice to return to the normal display mode
or wait 20 seconds and the travel alarm will time out and automatically return to
the normal display mode.
Daylight Saving Time Setting
You can select whether or not your alarm recognizes the daylight saving time changes
twice a year and automatically changes. Some areas do not change time for daylight
saving time (Arizona and parts of Indiana). The default (factory) setting is daylight
saving time on.
• Press and hold the "MODE/MIN" button for 3 seconds.
• The time zone abbreviation will appear in the LCD.
• "DST" will be displayed to the left of the time zone abbreviation.
• Press and release the "MODE/MIN" button to toggle between daylight saving
time on and off.
• Press and release the "Snooze" button twice to return to the normal display mode
or wait 20 seconds and the travel alarm will time out and automatically return to
the normal display mode.
Display Mode Setting
The display below the time can be switched between showing the seconds and the alarm
time. To switch between these two modes press and release the "MODE/MIN" button.
Setting the Alarm
To set the alarm press and hold the "AL/HR" button for three seconds.
• The alarm time will flash in the bottom left of the LCD screen.
• Press and release the "AL/HR" button to advance to the desired hour.
• Press and release the "MODE/MIN" button to advance to the desired minute.
• Press and release the "Snooze" button to return to the normal display mode or
wait 20 seconds and the travel alarm will time out and automatically return to the
normal display mode.
Operating the Alarm and Snooze
To turn the alarm on press and release the "AL/HR" button. The alarm icon will be
displayed in the lower right of the LCD to indicate that the alarm has been turned on.
4
Advertisement
