Time Zone Setting - La Crosse Technology WT-5120 Instruction Manual

12/24-Hour setting
•
°C/°F setting
•

TIME ZONE SETTING

The time zone default of the Projection clock is "0h". To set a different time zone:
1. Press and hold the MODE/MIN key for about 3 seconds. The current time zone
value at the bottom of the LCD display starts flashing.
2. Press and release MODE/MIN key to adjust the time zone. The range runs from
0h to 12h, then –12h to 0h, in consecutive 1-hour intervals.
3. Confirm with the SNOOZE key and enter the Manual time setting.
Flashing
55