Download Print this page

Troubleshooting - Stihl BGA 57 Instruction Manual

Hide thumbs Also See for BGA 57:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
English
► If your blower has a malfunction or is dam‐
aged or requires servicing: Contact your
STIHL servicing dealer.
16.2
Servicing and Repairing the
Battery
The battery requires no servicing and cannot be
repaired.
► If the battery has a malfunction or is damaged:
Replace the battery.
16.3
Servicing and Repairing the
Charger
The charger requires no servicing and cannot be
repaired.

17 Troubleshooting

17.1
Troubleshooting the Blower or Battery
Fault
LEDs on the
battery
The blower does
1 LED flashing
not start when
green.
switched on.
1 LED emits
red light.
3 LEDs flash
red.
3 LEDs light up
red.
4 LEDs
flash red.
The blower swit‐
3 LEDs light up
ches off while in
red.
operation.
The blower ope‐
rating time is too
short.
32
If the charger has a malfunc‐
tion or is damaged: Replace
the charger.
If the connecting cable has a
malfunction or is damaged: Do
not use the charger and have
connecting cable replaced by a
STIHL servicing dealer.
Cause
State of charge of the
battery is too low.
The battery is too
warm or too cold.
There is a fault in the
blower.
The blower is too
warm.
There is a fault in the
battery.
There is a break in the
electrical connection
between the blower
and the battery.
The blower or the bat‐
tery is damp.
The blower is too
warm.
There is an electrical
fault.
The battery is not fully
charged.
Remedy
► Charge the battery.
► Remove the battery.
► Allow the battery to cool down or warm
up.
► Remove the battery.
► Clean electrical contacts in the battery
compartment.
► Insert battery.
► Switch on blower.
► If 3 LEDs continue to flash red: Do not
use the blower and contact your STIHL
dealer for assistance.
► Remove the battery.
► Allow the blower to cool down.
► Remove battery and reinsert it.
► Switch on blower.
► If 4 LEDs continue to flash red: Do not
use the battery; contact a STIHL authori‐
zed dealer.
► Remove the battery.
► Clean electrical contacts in the battery
compartment.
► Insert battery.
► Allow blower or battery to dry,
► Remove the battery.
► Allow the blower to cool down.
► Remove battery and reinsert it.
► Switch on blower.
► Fully charge the battery.
17 Troubleshooting
18.6.
0458-807-9821-B

Advertisement

loading