Table of Contents
Advertisement
PROGRAM MODE
Programming Note: If 30 seconds are allowed to pass or either the IN or
the OUT button is pressed during programming modes, the unit will set the
last information entered—the display will stop flashing and return to
normal time-date readings. If you don't leave the program mode during the
programming of sections III through VIII, you can advance to step 3 of the
next program setting. If you do leave the program setting (or want to
program a specific setting) follow each instructional step to program that
setting.
I. PROGRAMMING SEQUENCE
The sequence for programming the indoor weather station and the default
(factory) settings are:
The programming instructions are given in a manner so that each setting is
done separately. On initial set-up and after inserting new batteries to
program all functions simply disregard the first two steps of each section
starting with the Time Zone Setting.
1. 12/24 hour time setting
2. Time Zone
3. Daylight Saving Time
4. Time – hour
5. Time – minute
6. Date – day of the week
7. Date – month
8. Date – day of the month
9. Date – Year
10. Temperature
11. LCD (liquid crystal display) contrast
12. End of sequence
7
12 hour
Zo -5 (eastern)
1 (on)
12
00
mo (Monday)
1 (January)
1
1999
°F
5
Hide quick links:
Advertisement
Table of Contents
