La Crosse Technology WS-7044UA Instruction Manual page 16

their desired location, and wait approximately 10
minutes before permanently mounting to ensure
that there is proper reception.
Temperature Station should display a temperature
in the OUTDOOR LCD within 3 minutes of
setting-up.
I. THE REMOTE TEMPERATURE
TRANSMITTER
The Remote Temperature Transmitter can be
mounted in two ways:
•
with the use of screws, or
•
using the adhesive tape.
A. MOUNTING WITH SCREWS
1. Remove the mounting bracket from the
Remote Temperature Transmitter. The
bracket should snap off easily.
2. Place the mounting bracket over the
desired location. Through the three
screw holes of the bracket, mark the
mounting surface with a pencil.
16
The Weather