Thermador HPCN36WS Installation Instructions Manual page 20

2. Locate two studs at the mounting location.
1¼" (32) 1¼" (32) 1¼" (32)
14" 14" 14"
(356) (356) (356)
18" – 35" 18" – 35" 18" – 35"
( 457 – 889) ( 457 – 889) ( 457 – 889)
Model
36'' 14'' (356)
48'' 14'' (356)
3. At the wall stud locations, measure 1-1/4'' (32 mm)
down from the ceiling to the middle of the bracket.
4. Mount the bracket at the wall stud locations using two
(2) 1½'' (38 mm) screws (provided). Ensure that the
bracket is level.
19
17" 17"
(432) (432)
18" 18"
(457) (457)
18" 18" 18"
(457) (457) (457)
inches (mm)
A B
20-3/4'' (527)
32-7/8'' (835)
inches (mm)
5. Insert the complete duct cover at an angle and swivel
toward the wall.
6. Carefully pull the top part of the extension upwards.
Screw the left and right sides of the extension to the
mounting bracket with the supplied stainless screws.