When A Failure Is Suspected - JVC CL-R813 Instruction Manual

When a failure is suspected...

Symptom
The monitor won't turn on!
(The LED indicator is off.)
The screen doesn't come on!
"No Signal" appears...
LED indicator keeps flashing
in green
Images on computer are not
displayed properly.
Cause and Solution
• Make sure the monitor AC power cord is plugged.
( P24 ）
• Check if the monitor is turned on.
• Check if cables are connected correctly.
• Check if the computer is turned on.
• If the LED indicator is orange, the computer may be in
power saving mode. Press any key on the keyboard to
wake up the computer.
• "DP Power" function may be selected OFF. Please turn
on a monitor by the stand-by key or the main switch.
• The input signal frequency or display resolution may
not be appropriate for the monitor. Refer to the
computer instruction manual and adjust the frequency
and/or resolution.
• Check if signal cables are connected correctly.
P24 ）
• Check if your computer turns on.
• The monitor resolution may not be appropriate for
the monitor. Refer to the computer instruction manual
and adjust resolution.
• Turn off the main power switch, and after five seconds,
turn it on again. If the error status still remains, please
consult your dealer.
• Images might not be displayed well by the
combinations of graphics card, driver and OS etc. For
recommended graphics cards, please consult your
dealer.
- 43 -
P24 ）
（
（
ENGLISH