Disabling The Starter Kill Without A Transmitter; Valet Mode - Clifford 562C User Manual

Clifford security system user manual

Table of Contents

Disabling the Starter Kill Without a Transmitter

If your remote transmitter is lost or damaged, you can manually

override the starter kill. To do this, you must have the vehicle's

ignition key and know where the Valet

to check with the installer for the location of the Valet

To override the starter kill, turn

and the vehicle should start. If it does not start,

you may have waited too long; turn the ignition off and repeat the

process.

LOCATION OF VALET

Valet

Mode

You can prevent your system from automatically activating the

Failsafe

Starter Kill and locking the doors by using Valet

This is very useful when washing the vehicle or having it serviced.

In Valet

Mode, the starter kill cannot be activated, even with the

transmitter, but all convenience functions (door locks, remote

start, etc.) will continue to work normally.

the ignition on and press the

Valet

switch within 10 seconds.

The status LED will stop flashing

SWITCH_____________________________

switch is located. Be sure

DRW-35

2004 Directed Electronics, Inc.

switch.

Mode.

Table of Contents