Panic Mode - Clifford 562C User Manual

Clifford security system user manual

Table of Contents

To enter or exit Valet

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Valet

The status LED will light steadily if you are entering Valet

and will turn off if you are exiting Valet

Panic Mode

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your transmitter. Just

press

for 1.5 seconds to enter Panic Mode. In Panic Mode, the

horn will honk and the parking lights will flash for 30 seconds. To

stop Panic Mode at any time, press

transmitter.

NOTE: In order for Panic Mode to be effective, the vehicle's horn (or

optional siren) as well as the vehicle's parking lights must be

connected.

2004 Directed Electronics, Inc.

Mode:

switch within 10 seconds.

DRW-35

Mode.

, or

Mode

on the

Table of Contents