Table of Contents
Advertisement
BATTERY SAFETY WARNING FOR IEEE1725
Do not disassemble, open, crush, bend, deform,
puncture or shred.
Do not modify or remanufacture, immerse or
expose to water or other liquids, expose to fire,
explosion or other hazard, or attempt to insert
foreign objects into the battery.
Only use the battery for the device it was
designed for.
Only use the battery with a charging system that
has been qualified with the system per CTIA
Certification Requirements for Battery System
Compliance to IEEE 1725. Use of an unqualified
battery or charger may present a risk of fire,
explosion, leakage, or other hazard.
Do not short circuit a battery or allow metallic
conductive objects to contact battery terminals.
Promptly dispose of used batteries in
accordance with local regulations.
Replace the battery only with another battery
that has been qualified with the system per this
standard, IEEE-Std-1725.
Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a hard
surface and you suspects damage take it to a
service center for inspection.
Improper battery use may result in a fire,
explosion or other hazard.
HAZARDOUS LOCATION USAGE WARNING
CHARGING SAFETY WARNING
The equipment shall only be charged when in a
non-hazardous area using a charger specifically
supplied for use with the unit, USB cable and
AC charger S42A02 (US plug)/S42A00 (EU
plug)/42A01 (UK plug).
When using the SELV function, it is
recommended to use the DC5 V/2A pin to
charge your device.
8
Advertisement
Table of Contents
