Table of Contents
Advertisement
12.
Default Alarm ringtone: Select the desired alarm
ringtone from the list and tap on OK to set as the
ringtone.
13.
Emergency Broadcasts:
• Emergency alert settings:
• Show presidential alerts: Check this option to
get an emergency alert system which allows the
US president to address the country in the event
of national emergency.
• Show extreme threats: Check this option to get
the extreme threat alerts. For example; tsunami,
tornado, extreme wind, hurricane and typhoon
warnings.
• Show severe threats: Check this option to get
the severe threat alerts. For example; storm surge,
flash flood and dust storm warnings.
• Show AMBER alerts: Check this option to get
the child abduction emergency bulletins.
• Turn on notifications: When checked,
emergency alert broadcast are displayed.
• Alert reminder: You can set the alert reminder for
the following time frame: Once, Every 2 minutes,
Every 15 minutes, and Off.
• Vibrate: Check this message to set the device on
vibrate during alert.
• Speak alert message: Check this option to
use text-to-speech to speak emergency alert
messages.
• ETWS settings: Check the option Show ETWS
test broadcasts to display test broadcasts for
earthquake and tsunami warning system.
• Developer options: Check the option Show
CMAS test broadcasts to display test
broadcasts for commercial mobile alert system.
Check the option Show opt-out dialog to show
an opt-out dialog after displaying the first CMAS
alert (other than Presidential alert).
14.
Other sounds: Turn ON the following options to
access the sound:
• Keypad sounds
• Dialpad sounds
• Screen locking sounds
• Touch sounds
• Vibrate on tap
15.
Cast: You can cast your screen from your device.
Connect your device to the same Wi-Fi network
as your Miracast™ or TV. Tap on Option (
check the box next to Enable wireless display.
MANAGING DEVICE SETTINGS
APPS
1.
From App screen, tap on Settings (
Apps (
2.
Select All apps drop-down list. You can select
any of the following options:
• All apps
• Enabled
• Disabled
3.
If you wish to Force Stop an application, open the
Apps menu, select the application you wish to
force stop and select Force Stop.
4.
On the Apps screen, tap on Options (
following options are displayed:
• Show system
• Reset app preferences
5.
Tap the icon (
apps window is displayed. The following options
are displayed:
• App permissions: The list of apps with the
permission are displayed.
• Default: The assigned default apps are displayed.
• Advanced: Displays the list of Special access.
USB POWER SAVING
1.
From App screen, tap on Settings (
USB Power Saving (
2.
Automatic Power ON: If enabled, the device will
be automatically powered ON when the USB is
connected.
3.
Automatic Power OFF:
• Automatic Power OFF: If enabled, the device will
be automatically powered OFF at the set time.
• Power OFF device at: If you enable Automatic
Power off, this option will be active. You can set
the time for the device to be powered off.
• Automatic Power OFF: If this is enabled, the
device will be powered off at the set time.
• On USB disconnect, Power OFF: You can set
the time for the device to be powered off once the
USB is disconnected.
STORAGE
) >
1.
From App screen, tap on Settings (
Storage (
2.
On Internal shared storage, the following options
are displayed with memory used for each app:
• Shows the used memory
).
When you force stop an application, it may
cause the application to mis-function in the
future.
) on Apps screen. Configure
).
).
) > Device >
). The
) > Device >
) > Device >
22
Advertisement
Table of Contents
