What Each Button/Channel Does - Clifford concept 30 Owner's Manual

What each button/channel does

Your Concept 30 remote controls come pre-programmed so that certain channels
command certain functions. If you wish, you can actually assign any channel to any
function (see pages 16–18). The following chart indicates what each remote control
channel number does, and how to transmit each channel number.
Factory settings of the 12 remote control channels
Transmitting
channel
number:
1
arm or disarm and lock or unlock the doors
pop the trunk* (if the system is disarmed)
2
turn on the headlights* or close the windows* (if the system is armed)
3
4
activate optional accessory function #1
5
activate optional accessory function #2
6
activate optional accessory function #3
7
activate optional accessory function #4
8
activate optional accessory function #5
9
activate optional accessory function #6
10
activate optional accessory function #7
11
activate optional accessory function #8
12
activate optional accessory function #9
* May require additional wiring.
Press button 1 (channel 1) once. You will hear two chirps and
TO ARM
THE SYSTEM . . . . . . .
the parking lights will flash twice. The dashboard LED will
flash repeatedly and the car doors will automatically lock.
Press button 1 (channel 1) again. One chirp and one flash of
TO DISARM
THE SYSTEM . . . . . . .
the parking lights will confirm disarming. In addition, the car
doors will automatically unlock and the interior lights will
turn on and stay on for 30 seconds or until you start the
engine, whichever occurs first..
Causes the system to:
AND
silently arm or disarm
7
Press the How Press
LevelShift many button
button? times? number
no — 1
no — 2
no — 3
no — 4
yes once 1
yes once 2
yes once 3
yes once 4
yes twice 1
yes twice 2
yes twice 3
yes twice 4
continued . . .