Doors are covered by FACT
open door for three full cycles, the doors will be bypassed until the trig-
ger ceases. FACT
section of this guide.
n n o o t t e e : : Arming and disarming the system does not reset this function! The
only way to reset a bypassed zone is for 60 minutes or to turn on the igni-
tion. If testing your system, it is important to remember that the FACT II pro-
gramming can cause zones to be bypassed and appear to stop working.
If you wish to clear the FACT II memory, turn the ignition key on.
select siren sounds
To customize siren sounds, please refer to the selectable siren sounds
feature in the User Selectable Features grid. Once in programming
mode, press
able sounds.
Press
on the PlainView 2 Valet switch while playing the desired
sound to add that sound; press
delete that sound.
n n o o t t e e : : Additional tones can be accessed through the CliffNet Wizard.
© 2 0 0 6 d i re c t e d e l e c t ro n i c s — a l l r i g h t s re s e r v e d
II
differently; if the alarm is triggered by an
II
is programmable. See the Programming Options
on the transmitter to begin playback of the avail-
while playing the desired sound to
17