Transmitter Functions; Standard Configuration - Clifford AvantGuard 5.1 Owner's Manual

transmitter functions

This system uses computer-based code learning to learn the transmit-
ter buttons. This makes it possible to assign any transmitter button to
any system function. The transmitter initially comes programmed with
standard configuration, but may also be customized using the CliffNet
Wizard PC program. The buttons in all of the instructions in this man-
ual correspond to a standard configuration transmitter.

standard configuration

Button
The arming, disarming, and panic function are controlled by this but-
ton.
Button
The trunk release or accessory output A is controlled by this button.
Button
warning! Operation of the remote start module
if the the vehicle starts in gear is contrary to its
intended mode of operation. Operating the
remote start system under these conditions may
result in property damage or personal injury.
Immediately cease the use of the unit and repair
or disconnect the installed remote start module.
Clifford will not be held responsible or pay for
installation or reinstallation costs.
Remote start is controlled by this button.
© 2 0 0 6 d i re c t e d e l e c t ro n i c s — a l l r i g h t s re s e r v e d
7