Getting Started - Panasonic SC-GT07 Owner's Manual

Getting started

Making the connections
1
Prepare the setting stand.
2
Install the unit on the setting stand.
Align and put the unit on the setting stand, turn the
screw clockwise to secure the unit.
4
4
3
Connect the AC power supply cord.
The system consumes approximately 0.1 W when it
is in standby mode.
Do not use an AC power supply cord from other
equipment.
Note:
• Do not sit on top of the unit.
• Some settings return to default when you disconnect the
system.
• These speakers do not have magnetic shielding. Do
not put them near TVs, PCs or other equipment easily
influenced by magnetism.
• Do not remove the speaker nets.
• Hold the unit firmly when moving it. Do not hold the
setting stand.
Preparing the remote control
Before using
Remove the insulation sheet.
To household
AC outlet Replacing the battery
Replace with a new battery (CR2025 lithium battery).
1
While pressing the stopper, pull out the
battery holder.
2
Insert a new battery with the (+) side facing
up.
3
Push the battery holder back fully.
Warning!
Keep the button-type battery out of reach of children to
prevent swallowing.
CR2025