Flywheel
VPA 7748089 English 09-2007
Slide flywheel cover into place. Install screws and tighten them
5.
to 7-9 N•m (60-84 in. lb.)
Install engine, see Engine Installation and Removal Workshop
6.
Manual.
20034
Removal
Engine coupler, Engine Coupler on page 116
1.
Remove flywheel from crankshaft studs.
2.
188129
NOTICE! If replacing the engine flywheel, then NEW flywheel
Note the position of any flywheel weights for assembly (if appli-
3.
cable).
64126
weights must be installed into the NEW engine fly-
wheel in the same location as the old flywheel weights
in the old engine flywheel.
Engine — 5.0 & 5.7 Litre
119