Iv-7. Mirror - Edimax GS-5210PLG Manual

Link Group
Activity
Link Group
Member
Apply

IV-7. Mirror

Port mirroring selects the network traffic for analysis by a network analyzer.
This is done for specific ports of the switch. You may configure the ports as
source ports or configure one of the ports is as a destination port.
Item
Enable Mirror
Mirror Direction
By default, the Switch uses the MAC SA & DA
distribution type.
MAC SA & DA: To distribute traffic based on a
combination of the packet's source MAC address
and destination MAC address.
MAC SA: To distribute traffic based on the packet's
source MAC address.
MAC DA: To distribute traffic based on the packet's
destination MAC address.
Switch TX LACP control packet Passive or Active.
By default, the Switch uses the Passive mode.
The check box of ports would be checked after the
port is added into the Link Group successfully.
Click Apply to save your changes.
Enable/disable port mirroring.
Select the mirror direction:
 Both( Ingress and Egress)

Ingress

Egress
16
Description