Iv. Appendix; Iv-1. Configuring Your Ip Address - Edimax BR-6208AC V2 User Manual

IV. Appendix

IV-1. Configuring your IP address
For first time access to the URL http://edimax.setup please ensure your
computer is set to use a dynamic IP address. This means your computer can
obtain an IP address automatically from a DHCP server. You can check if your
computer is set to use a dynamic IP address by following
that your computer uses a dynamic IP address.
Static IP users can also te po a il
in the same IP address subnet e.g. 192.168.2.x (x = 3 – 254) as the BR-6208AC
V2 in order to access http://edimax.setup.
The BR-6208AC V2's default IP address is 192.168.2.1.
The procedure for modifying your IP address varies across different operating
systems; please follow the guide appropriate for your operating system in
IV-1-2. How to modify the IP address of your
Static IP users please make a note of your static IP before you
change it.
You can assign a new IP address to the device which is within the subnet of
your network during setup or using the browser based configuration interface
(refer to III-3-4.
future without modifying your IP address.
Please remember to change your IP address back to its original
value after the device is properly configured.
LAN). Then you can access the URL http://edimax.setup in
odif ou o pute s IP add ess to e
computer.
108
IV-1-1. How to check