Table of Contents
Advertisement
Item
Apply
Port
PVID
Create New VLAN
VLAN ID
Non-Member
Tag Egress Member
Untag Egress Member
Modify
Delete
NOTE: PVID will be assigned to any untagged frames entering the switch on
that port (assuming the switch is using port-based VLAN classification). Each
port can set a PVID ONLY.
Create New VLAN
Click "Create New VLAN" to enter new VLAN settings.
Enter the valid VLAN ID (2~4094), and click "Apply".
New VLAN has been created!
Click "Apply" to save the values.
Designated port number.
Enter a Port VLAN ID for each port.
Click "Create New VLAN" to enter new
VLAN settings.
Virtual LAN ID, or called VID
Port is not a member of a VLAN.
Tag outgoing packets of a port which is a
member of the VLAN.
Untag outgoing packets of a port which is
a member of the VLAN.
Modify port settings of a specific VLAN.
Delete a specific VLAN.
13
Description
Advertisement
Table of Contents
