Fisher & Paykel DE7060P2 Installation Manual/User Manual page 74

PROBLEM
Dryer is beeping,
displaying
unfamiliar light
patterns and/or a
message on the
digital display
Noises
Vibration
Creasing
Dye transfer
30
TROUBLESHOOTING
POSSIBLE CAUSES
Dryer has a fault.
Dryer is overloaded.
Dryer has a fault.
Beeps signalling the end of
a drying cycle.
Dryer is not installed on a
stable surface.
Dryer is overloaded.
Cycle selection not
appropriate for the load.
Dryer is overloaded.
'Dry Temp' and/or 'Dryness
Level' selected too hot/too
long for load type.
'Wrinkle Free' option
not selected.
White/light and coloured
items not separated before
drying.
Wet items left sitting in the
dryer for long periods of
time before drying.
WHAT TO DO
Refer to page 28.
Remove some items from the dryer.
Continuous beeping or a musical
series of beeps with a message
displayed on digital display. Refer
to page 28.
End of cycle beeps can be turned
off. Refer to page 25.
Ensure the dryer is installed on
a flat, stable surface. Refer page
7.
Remove some items from the dryer.
Select the 'Easy Iron' cycle
(DE7060P only), or 'Wrinkle Free'
option to minimise creasing.
Remove some items from the dryer.
Try selecting a lower 'Dry Temp' and
'Dryness Level'.
Select the 'Wrinkle Free' option to
rotate the load at the end of the
drying cycle. Refer to page 25.
Remember to separate white/light
and coloured items before placing
them in the dryer.
Do not leave wet items sitting in
the dryer for long periods of time
before drying, if they are prone to
colour run. If you do intend to leave
them for long periods before drying,
then separate the load and put
those items that may cause colour
run aside.