Toshiba e-STUDIO556 Service Manual page 703

05/08 Mode Element Sub
element
08 Setting System Feeding
Mode system /
Paper
transport
08 Setting System User General
Mode interface
08 Setting System User General
Mode interface
08 Setting System User General
Mode interface
08 Setting System User General
Mode interface
08 Setting System General Self-certificate
Mode
08 Setting System General Self-certificate
Mode
08 Setting System Network
Mode
e-STUDIO557/657/757/857
Item Subitem Code Sub-
8967
8968
8969
8970
8971
8973
8974
8975
Details Default Acceptable
code value value
Rotation printing by 1
guides width of
bypass feed tray
Language package -
information (Panel
Help)
Language package -
information
(WebHelp)
Language package -
information (Service
UI)
Installation of -
language package
Length of public key 1
Signature algorithm 0
Data clearing of Point -
and Print
134
RAM Contents
0-1 SYS If the printing size and the guides width of the bypass
feed tray are different, it is judged that paper is set in
the wrong direction. The occurrence frequency of
interruption by the error of the guides width may be
decreased. However, this code does not work
depending on the conditions, such as when stapling is
selected. Set this code when requested by user or the
guides width sensor is broken. Related code: 08-4621.
0: Invalid
1: Valid
- - Displays the language package information of the
installed Panel Help.
- - Displays the language package information of the
installed WebHelp.
- - Displays the language package information of the
installed Service UI.
- - Installs the language package.
0-1 SYS 0: 1024 bit
1: 2048 bit
0-4 SYS 0: SHA1
1: SHA224
2: SHA256
3: SHA384
4: SHA512
- SYS Point and Print in the equipment is deleted when this
code is performed. Perform this code when a trouble
occurs such as when uploading Point and Print is not
possible. After performing this code, upload Point and
Print from [Maintenance] menu in the [Administration]
menu of TopAccess.
Proce Servic
dure e UI
1
2 Yes
2 Yes
2 Yes
3 Yes
1
1
3