Pair" To Your Bluetooth; Phone - Jabra FreeSpeak FS258 User Manual

4 "Pair" to your Bluetooth phone
Pairing 3 will create a unique and encrypted wireless link between
two Bluetooth-enabled devices such as your Bluetooth phone and
JABRA FS258.
1. Ensure the headset is off (see Turning
headset on/off section).
2. Press and hold
blue light (approximately 8 seconds),
then release* (see Fig. 2).
3. Set your Bluetooth phone to "discover"
the headset by following your phone's
instruction guide. Typically, the steps
involve going to a "setup" , "connect" ,
or "Bluetooth" menu on your phone
and then selecting the option to
"discover" a Bluetooth device.
4. Your phone will find the "JABRA 250"
headset and ask if you want to pair
with it. Confirm this by pressing "yes"
or "ok" .
5. Enter passkey or PIN
IMPORTANT: If pairing was successful, the blue indicator light will briefly flash
rapidly before going back to flashing every 3 seconds. If unsuccessful, the light
remains solid, and you'll need to reattempt pairing (see steps 3–5 above).
* If you have a Bluetooth phone that supports the hands-free Bluetooth
profile, see Enhanced features section for alternative pairing
instructions. Phone-specific pairing instructions can be found online at
www.jabra.com/fscs
6
until you see a solid
4 = 0000 (4 zeros), then press "yes" or "ok" .
Fig. 2
Fig. 3