Package Contents; Hardware Installation - Grandstream Networks GWN7615 Quick Installation Manual

OVERVIEW
EN
The GWN7615 is a good-performance 802.11ac Wave-2 Wi-Fi access
point for small to medium sized businesses, multiple floor offices, com-
mercial locations and branch offices. It offers dual-band 3×3:3 MU-MI-
MO technology and a sophisticated antenna design for maximum net-
work throughput and expanded Wi-Fi coverage range. To ensure easy
installation and management, the GWN7615 uses a controller-less
distributed network management design in which the controller is em-
bedded within the product's web user interface. The GWN7615 is also
supported by GWN.Cloud and GWN Manager, Grandstream's cloud
and on-premise Wi-Fi management platforms. It is the ideal Wi-Fi AP
for voice-over-Wi-Fi deployments and offers a seamless connection with
Grandstream's Wi-Fi-capable IP phones. With support for advanced
QoS, low-latency real-time applications, mesh networks, captive por-
tals, 200+ concurrent clients per AP and dual Gigabit network ports
with PoE/PoE+, the GWN7615 is an ideal Wi-Fi access point for me-
dium wireless network deployments with medium to-high user density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of -10 °C to
60 °C for storage and 0 °C to 40 °C for operating.
• Do not expose the GWN7615 to environments outside of the follow-
ing humidity range: 10-90% RH (non-condensing).
• Do not use the GWN7615 in outdoor environment.
• Do not power cycle your GWN7615 during system boot up or firm-
ware upgrade. You may corrupt firmware images and cause the unit
to malfunction.

PACKAGE CONTENTS

×
1 GWN7615
Access Point
×
3 Screw
×
(PM 3 50)
× ×
1 Ceiling
1 Mounting
Mounting Bracket
Bracket
×
3 Screw
×
3 Plastic Expansion
×
Bolt
(PA 3.5 20)
~1~
×
× 1 Quick Installation Guide
3 M3 NUT
GWN7615 PORTS
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
NET Ethernet RJ45 port (10/100/1000Mbps) to your router
or another GWN76xx.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7615
GWN7615 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7615.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port

HARDWARE INSTALLATION

GWN7615 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch