Grandstream Networks GWN7610 User Manual
Enterprise 802.11ac wifi access point
Hide thumbs
Also See for GWN7610:
- User manual (74 pages) ,
- Quick installation manual (48 pages) ,
- Deployment manual (35 pages)
Related Manuals for Grandstream Networks GWN7610
Summary of Contents for Grandstream Networks GWN7610
- Page 1 Grandstream Networks, Inc. GWN7610 Enterprise 802.11ac WiFi Access Point User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610...
- Page 2 Grandstream Networks, Inc. is not permitted. The latest electronic version of this guide is available for download here: http://www.grandstream.com/support Grandstream is a registered trademark and Grandstream logo is trademark of Grandstream Networks, Inc. in the United States, Europe and other countries. CAUTION Changes or modifications to this product not expressly approved by Grandstream, or operation of this product in any way other than as detailed by this guide, could void your manufacturer warranty.
- Page 3 Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610...
- Page 4 GNU GPL INFORMATION GWN7610 firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact terms and conditions of the license.
-
Page 5: Table Of Contents
GETTING STARTED ..................... 19 LED Patterns ............................19 Discover the GWN7610 ........................20 Method 1: Discover the GWN7610 using its MAC address............20 Method 2: Discover the GWN7610 using GWNDiscoveryTool ............. 20 Use the Web GUI ..........................21 Access Web GUI .......................... 21 Web GUI Languages ........................ - Page 6 Upgrading Slave Access Points ......................51 Provisioning and backup ........................54 Download Configuration ....................... 54 Upload Configuration ........................54 Configuration Server (Pending) ....................55 Reset and reboot ..........................55 EXPERIENCING THE GWN7610 WIRELESS ACCESS POINT ........56 P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610...
- Page 7 Table of Tables Table 1: GWN7610 Technical Specifications ....................13 Table 2: GWN7610 Equipment Packaging ....................15 Table 3: GWN7610 Ports Description ......................15 Table 4: LED Patterns ..........................19 Table 5: Overview ............................25 Table 6: Device Configuration ........................29 Table 7: Wi-Fi ..............................
- Page 8 Figure 8: Ceiling Mount – Step 4 ........................ 18 Figure 9: Ceiling Mount – Steps 5 & 6 ......................18 Figure 10: Discover the GWN7610 using its MAC Address ................ 20 Figure 11: GWN Discovery Tool ........................21 Figure 12: GWN7610 Web GUI Login Page ....................22 Figure 13: Change Password on first boot ....................
- Page 9 Figure 40: IP Ping ............................49 Figure 41: Traceroute ..........................50 Figure 42: Syslog ............................50 Figure 43: Access Points ..........................52 Figure 44: Device Configuration ......................... 53 Figure 45: GWN7610 Upgrading ........................ 53 P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610...
-
Page 10: Document Purpose
DOCUMENT PURPOSE This document describes how to configure the GWN7610 via Web GUI in standalone mode, with other GWN7610 as Master/Slave architecture and more. The intended audiences of this document are network administrators. Please visit http://www.grandstream.com/support to download the latest “GWN7610 User Manual”. -
Page 11: Change Log
CHANGE LOG This section documents significant changes from previous versions of the GWN7610 user manuals. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. Firmware Version 1.0.2.108 •... -
Page 12: Welcome
This wireless access point can be paired with any third party routers. With support for advanced QoS, low- latency real-time applications, 250+ client devices per AP and dual Gigabit network ports with PoE/PoE+, the GWN7610 is an ideal wireless access point for large and small wireless network deployments. Caution: Changes or modifications to this product not expressly approved by Grandstream, or operation of this product in any way other than as detailed by this User Manual, could void your manufacturer warranty. -
Page 13: Product Overview
PRODUCT OVERVIEW Technical Specifications Table 1: GWN7610 Technical Specifications Wi-Fi Standards IEEE 802.11 a/b/g/n/ac 3x 2.4 GHz, gain 3 dBi, internal antenna Antennas 3x 5 GHz, gain 3 dBi, internal antenna IEEE 802.11ac: 6.5 Mbps to 1300 Mbps IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps Wi-Fi Data Rates IEEE 802.11n: 6.5 Mbps to 450 Mbps... - Page 14 Network Protocols IPv4, 802.1Q, 802.1p, 802.1x, 802.11e/WMM 802.11e/WMM, VLAN, TOS Network Embedded controller in GWN7610 allows it to auto-discover, auto-provision and Management manage up to 50 GWN7610s in a network Auto Power Saving Self-power adaptation upon auto detection of PoE or PoE+...
-
Page 15: Installation
INSTALLATION Before deploying and configuring the GWN7610, the device needs to be properly powered up and connected to the network. This section describes detailed information on installation, connection and warranty policy of the GWN7610. Equipment Packaging Table 2: GWN7610 Equipment Packaging... -
Page 16: Power And Connect Gwn7610 Access Point
Connect the other end of the Ethernet cable(s) into a LAN port to your Network. Step 3: Connect the 24V DC power adapter into the power jack on the back of the GWN7610. Insert the main plug of the power adapter into a surge-protected power outlet. -
Page 17: Wall And Ceiling Mount Installation
Wall and Ceiling Mount Installation GWN7610 can be mounted on the wall or ceiling, please refer to the following steps for the appropriate installation. Wall Mount Step1: Position the mounting bracket at the desired location on the wall with the arrow pointing up. -
Page 18: Ceiling Mount
Step 3: Insert the screws through the mounting bracket. Step 4: Connect the power cable and the Ethernet cable (RJ45) to the correct ports of your GWN7610. M3.0x50 screw Figure 7: Ceiling Mount – Step 3 Step 5: Align the arrow on the GWN7610AP with the arrow on the locking tab of the mounting bracket and ensure that your GWN is firmly seated on the mounting bracket and connect the network and power cables. -
Page 19: Getting Started
Web GUI interface. LED Patterns The panel of the GWN7610 has different LED patterns for different activities, to help users read the status of the GWN7610 whether it’s powered up correctly, provisioned, in upgrading process and more, for more details please refer to the below table. -
Page 20: Discover The Gwn7610
1. Locate the MAC address on the MAC tag of the unit, which is on the underside of the device, or on the package. 2. From a computer connected to same Network as the GWN7610, type in the following address using the GWN7610’s MAC address on your browser https://gwn_<mac>.local... -
Page 21: Use The Web Gui
IP address on your browser. Figure 11: GWN Discovery Tool Users can access then the GWN7610 using its Web GUI, the following sections will explain how to access and use the Web Interface. Use the Web GUI Access Web GUI The GWN7610 embedded Web server responds to HTTPS GET/POST requests. -
Page 22: Figure 12: Gwn7610 Web Gui Login Page
Figure 12: GWN7610 Web GUI Login Page To access the Web GUI: Make sure to use a computer connected to the same local network as the GWN7610. Ensure the device is properly powered up. Open a Web browser on the computer and type in the URL using the MAC address as shown in... -
Page 23: Web Gui Languages
Figure 13: Change Password on first boot Web GUI Languages Currently the GWN7610 series Web GUI supports English and Simplified Chinese. Users can select the displayed language at the upper right of the Web GUI either before or after logging in. -
Page 24: Overview Page
GWN7610’s information presented in a Dashboard style for easy monitoring. Figure 16: Overview Page Users can quickly see the status of the GWN7610 for different items, please refer to the following table for each item: P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 25: Save And Apply Changes
When clicking on "Save" button after configuring or changing any option on the Web GUI pages. A message mentioning the number of changes will appear on the upper menu. Figure 17: Apply Changes Click on button to apply changes, or to undo the changes. P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 26: Using Gwn7610 As Standalone Access Point
USING GWN7610 AS STANDALONE ACCESS POINT The GWN7610 can be used in Standalone mode, where it can act as Master Access Point Controller or in Slave mode and managed by another GWN7610 Master. This section will describe how to use and configure the GWN7610 in standalone mode. -
Page 27: Using Gwn7610 As Master Access Point Controller
“Set unit as Master” option will forbid the GWN7610 Access Point from being paired by other Master GWN7610, and can only act as a Master Access point controller. Users will need to perform a factory reset to the GWN7610, or unpair it from the initial GWN7610 to make it open to Master Access Point mode again. -
Page 28: Discover And Pair Other Gwn7610 Access Point
Figure 20: Setup Wizard Discover and Pair Other GWN7610 Access Point To Pair a GWN7610 access point connected to the same Network as the GWN7610 follow the below steps: 1. Connect to the GWN7610 Web GUI as Master and go to Access Points. -
Page 29: Table 6: Device Configuration
AP, more details refer to [Controller Protocol Security Enhancement] 3. Click on Pair under Actions, to pair the discovered Access Point as Slave with the GWN7610 acting as Master 4. The paired GWN7610 will appear Online, users can click on to unpair it. - Page 30 -Preferred IPv4 DNS: Enter the Primary IPv4 DNS. -Alternate IPv4 DNS: Enter the Alternate IPv4 DNS. • Frequency: Set the GWN7610’s frequency, it can be either 2.4GHz, 5GHz or Dual-band. • Enable Band Steering: When Frequency is set to Dual-Band,...
-
Page 31: Controller Protocol Security Enhancement
Note: If a GWN7610 is not being paired or the pair icon is grey color, make sure that it is not being paired with another GWN7610 Access Point acting as Master Controller, if yes, users will need to unpair it first, or reset it to factory default settings to make it available for pairing by other GWN7610 Access Point Controller. -
Page 32: Network Groups
NETWORK GROUPS When using GWN7610 as Master Access Point, users can create different Network groups and adding GWN7610 Slave Access Points. Log in as Master to the GWN7610 WebGUI and go to Network Group->Network Group. Figure 25: Network Group... - Page 33 Wi-Fi. Default is Use MAC Filtering Disabled. Client isolation feature blocks any TCP/IP connection between connected clients to GWN7610’s Wi-Fi access point. Client isolation can be helpful to increase security for Guest networks/Public Wi-Fi. Three modes are available: •...
-
Page 34: Figure 27: Device Membership
Device Membership: Used to add or remove paired access points to the network group. Figure 27: Device Membership Click on to add the GWN7610 to the network group, or click on to remove it. • Schedule: Used to schedule the times when the Wi-Fi is ON or OFF. -
Page 35: Figure 28: Wi-Fi Schedule
SSID on different periods of the day. Users can Also add a device to a Network Group from Access Points Page: - Select the desired AP to add to a Network Group and click on P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 36: Create An Ssid Under A Network Group
- Check to select the desired Network, on which the selected APs will be added, as shown in the above figure. Create an SSID under a Network Group Under Network Group Page, click to edit a network group or create a new network group and go to Wi-Fi tab. P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 37: Additional Ssid Under Same Network Group
] for Wi-Fi options. Table 7: Wi-Fi Additional SSID under Same Network Group Users can also create an additional SSID under the same group. To create an additional SSID go to Network Group->Additional SSID. P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 38: Figure 31: Additional Ssid
SSID with the same Device Membership configured when creating the main network group. Figure 32: Additional SSID Created Click on to delete the additional SSID, or to edit it. P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 39: Clients Configuration
CLIENTS CONFIGURATION Users can access clients list connected to GWN7610 zone from GWN7610 Web GUI -> Clients to perform different actions to wireless clients. Figure 33: Clients • Click on under Actions to check a client’s status and modify basic settings such as Device’s Name. -
Page 40: Led Schedule
LED SCHEDULE GWN7610 Access Points series support also the LED schedule feature. This feature is used to set the timing when the LEDs are ON and when they will go OFF at customer’s convenience. This can be useful for example when the LEDs become disturbing during some periods of the day, this way with the LED scheduler, you can set the timing so that the LEDs are off at night after specific hours and maintain the Wi-Fi service for other clients without shutting down the AP. -
Page 41: Figure 35: Leds Schedule
Figure 35: LEDs Schedule P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 42: Captive Portal
CAPTIVE PORTAL Captive Portal feature on GWN7610 Access Points allows to define a Landing Page (Web page) that will be displayed on Wi-Fi clients’ browsers when attempting to access Internet. Once connected to GWN7610 AP, Wi-Fi clients will be forced to view and interact with that landing page before Internet access is granted. - Page 43 Allow UDP port 67 This rule allows traffic over UDP on port 67 (DHCP) • Allow TCP port 80 This rule allows traffic over TCP on port 80 (HTTP) • Allow TCP port 443 P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610...
-
Page 44: Files Configuration Page
Files configuration page allows to view and upload HTML pages and related files (images…). The captive portal uses splash.html as landing page, Wi-Fi clients will be redirected to this page before accessing Internet. The following figure shows default splash.html page Figure 36: Default “splash.html” page P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 45: Clients Page
• Folder can be selected from the dropdown list Clients Page Clients page lists MAC addresses of authenticated devices using captive portal. Figure 38: Client Web Page P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 46: System Settings
Select the country from the drop-down list. This can affect the number of Country channels depending on the country standards. Configure time zone for the GWN7610. Please reboot the device to take Time Zone effect. Configure the IP address or URL of the NTP server, the device will obtain NTP Server the date and time from the configured server. -
Page 47: Access
Select the level of Syslog, 5 levels are available: None, Debug, Info, Syslog Level Warning and Error. Please reboot the GWN7610 to take effect. Debug GWN7610 offers many features for managing and monitoring connected clients to network groups, as well as debugging and troubleshooting. P a g e GWN7610 User Manual... -
Page 48: Capture
This section is used to generate packet trace captures from network groups interfaces which will help to sniff packets within the network group for troubleshooting purpose or monitoring... Users will need to plug a USB device to one of the USB ports on the back of the GWN7610. To access Capture page, go to Maintenance->Debug->Capture Click on to start capturing on a certain device plugged to the USB port. -
Page 49: Core Files
Ping and Traceroute are useful debugging tools to verify reachability with other clients across the network. The GWN7610 offers both Ping and Traceroute tools for IPv4 and IPv6 protocols. To use these tools, go to GWN7610 WebGUI->System Settings->Debug and click on Ping/Traceroute. -
Page 50: Syslog
Figure 41: Traceroute Syslog The syslog Web page displays logs generated by the GWN7610 for troubleshooting purpose as shown in figure below. Figure 42: Syslog P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 51: Upgrading And Provisioning
When the GWN7610 is being paired as slave using another GWN7610 Access Point acting as Controller, users can upgrade their paired access points from the GWN7610 Master Controller. To upgrade a slave access point, log in to the GWN7610 acting as Master Controller and go to Access Points. -
Page 52: Figure 43: Access Points
Make sure that firmware server path is set correctly under Maintenance, check the desired APs to upgrade, and click on to upgrade the selected paired access points, or click on next to the paired device to access its configuration page, and click on to upgrade the device. P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610... -
Page 53: Figure 44: Device Configuration
----------------------------------------------------------------------------------------------------------------------------- --------------- Notes: • Please do not interrupt or power cycle the GWN7610 during upgrading process. • The Master Access Point needs to be upgraded from Web GUI->System Settings->Maintenance. It cannot be upgraded from Access Points page like the Paired Access Points. -
Page 54: Provisioning And Backup
Microsoft IIS Web server. Provisioning and backup The GWN7610 configuration can be backed up locally or via network. The backup file will be used to restore the configuration on GWN7610 when necessary. Download Configuration Users can download the GWN7610 configuration for restore purpose under Web GUI->System Settings->... -
Page 55: Configuration Server (Pending)
Users can download and provision the GWN7610 by putting the config file on a TFTP/HTTP or HTTPS server, and set Config Server to the TFTP/HTTP or HTTPS server used for the GWN7610 to be provisioned with that config server file. -
Page 56: Experiencing The Gwn7610 Wireless Access Point
Thank you again for purchasing Grandstream GWN7610 Wireless Access Point, it will be sure to bring convenience and color to both your business and personal life P a g e GWN7610 User Manual https://arttel.ru/shop/besprovodnye-sistemy/grandstream-gwn7610...