Package Contents; Hardware Installation - Grandstream Networks GWN7660E Quick Installation Manual

OVERVIEW
EN
The GWN7660E is an enterprise-grade Wi-Fi 6 access point that allows
businesses to build next-generation Wi-Fi networks for high-density en-
vironments. It offers 2x2:2 MU-MIMO technology on the 2.4G band and
3x3:2 MU-MIMO on the 5G band as well as a sophisticated antenna de-
sign and uses XTRA Range technology with beamforming for maximum
network throughput and expanded Wi-Fi coverage range. To ensure
easy installation and management, the GWN7660E uses a controller-
less distributed network management design in which the controller is
embedded within the product's Web user interface. The GWN7660E
is also supported by GWN.Cloud and GWN Manager, Grandstream's
cloud and on-premise Wi-Fi management platform. It is the ideal Wi-Fi
AP for voice-over-Wi-Fi deployments and offers a seamless connection
with Grandstream's Wi-Fi capable IP phones. With support for advanced
QoS, low-latency realtime applications, mesh networks, captive portals,
256 concurrent clients per AP and Gigabit network ports with PoE/ PoE+,
GWN7660E is an ideal Wi-Fi access point for medium wireless network
deployments with medium-to-high user density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to
50 °C for operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7660E to environments outside of the fol-
lowing humidity range: 10-90% RH (non-condensing).
• Do not power cycle your GWN7660E during system boot up or
firmware upgrade. You may corrupt firmware images and cause the
unit to malfunction.

PACKAGE CONTENTS

1x GWN7660E Access Point
3x Screw
(PM 3 x 50)
1x Ceiling
1x Mounting
Mounting Bracket
Bracket
3x Screw
3x Plastic
(PA 3.5 x 20) Expansion Bolt
~1~
1 x Quick Installation Guide
3x M3 NUT
GWN7660E PORTS
Port Description
NET/POE 1G Ethernet RJ45 port (10Mbps /100Mbps /1Gbps) sup-
porting PoE/PoE+.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7660E
GWN7660E can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7660E.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port

HARDWARE INSTALLATION

GWN7660E can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch