Rack Mounting - ADC HRE-425 List 1 User Manual

150-425-100-04

Rack Mounting

The HRE-425 can be mounted into a 19-inch or a 23-inch relay type rack with one of the two rack mounting
brackets that are provided in the installation kit.
1 Orient the mounting brackets to the side panels consistent with the rack size (19 or 23-inch).
2 Attach the rack mounting brackets to the bracket mounting holes (see
four bracket attaching screws and locking nuts.
3 Attach the HRE-425 to the rack with the four mounting screws included.
HRE-425 List 1
Harmonic connector
mounting holes
Side View
Hinge Up
Hinge Down
Top
Bracket
mounting holes
Side View
Harmonic connector
mounting holes
Figure 3. Wall Mounting and Hinging View
September 22, 1999
Top
Bracket
mounting holes
Hinge
mounting
bolt
Backplate
Mounting hinge
bolt (remove)
Mounting
hinge
bolt
H0329-A
Figure 3) on each side panel with the
5