Mounting The Rt - ADC PRL-783 Manual

Installation and Test
M
OUNTING THE
Use the two No. 10x1.5-inch wood screws and flat washers provided in the Mounting Kit to attach the RT to the
side of the customer residence (see
No. 10 x 1-inch anchor nuts from the kit.
Mount the RT only as shown in Figure 4, with all access openings facing down. Otherwise, possibly
damaging materials (such as fluids) can enter the RT.
4
RT
Figure 2). For installation on stucco or other suitable surface, use the two
TELEPHONE
NETWORK
INTERFACE
Figure 2. Mounting the RT
January 6, 2003
Mounting hole
Customer Access door
CUSTOMER
ACCESS
Mounting hole
SCP-PRL783-012-03H
PG-Plus PRL-783