Hub Connection Issues - CAMBRIONIX SuperSync15 User Manual

If this still doesn't work, turn off the developer options at the top, re-enable it, and re-
: You can get detailed info directly from ADB at each step to diagnose things
Use -s SERIAL_NUMBER as first options if you have more than 1 Android attached
Sometimes, within Liveviewer and device manager, the connected device may show up as an
This can be due to the host system needing to be trusted on the device. This can be done on
This could also be due to an insufficient number of endpoints available on the USB controller in
the host system. This limitation within the USB controller can only be resolved if you connect
For Apple devices there is a setting called "USB accessories" which can be activated, Once
activated it will reduce the amount of times a device will need to be unlocked/ trusted. More
Sometimes, you may reach the endpoint limit of your USB controller and this may stop you
You can create more space is to change connections from USB3 to USB2. You can change the
A much simpler way is to use USB2 cables instead of USB3 cables, limiting the connection to
If you have issues with the hub and connecting to your host system, please see below
Page 30 of 38
. fewer USB devices to the controller in question
.
Cannot connect any more devices
. from being able to attach any more devices to your host system
. connection by disabling USB3 in the BIOS on startup

Hub connection issues

.' enable 'USB Debugging
adb.exe shell dumpsys battery
Unknown devices
. the device itself on the initial connection
information can be found at the link
. troubleshooting solutions
3 .
4 .
#
. unknown device
here
. USB2
. 7.5
SS15