Data Transfer; Communication Interface And Protocol - CAMBRIONIX SuperSync15 User Manual

If you wish to limit the charging to your devices whilst connected to your host system then you
. The CLI commands for turning off the sync charge options, with a 1 or 0 per port
: This can also be done via the API if this is easier. Just supply that string (joined with \n) like
cbrxapi.cbrx_connection_set(handle, "Settings", "settings_unlock\nsettings_reset\nsettings_
set sync_chrg 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0\nsettings_set alt_sync_chrg 0 0 0 0 0 0 0 0 0 0 0 0 0
Note that settings_reset clears any previous settings, so if you need to retain something else, it
would be better to issue settings_display first, which gives you the entire settings which you
If you wish to transfer data, change applications, restore or update your mobile device, a data
connection to a local host computer is required. The hub is compatible with macOS®,
Windows™ and Linux® operating systems and can transfer data between these operating
In order to transfer data, connect the host port to your local (host) computer using a USB 3.2
Gen 1 Type-A compliant cable. Any devices connected to the hub will now appear as if they
The SS15 appears as a virtual serial port (also called a UART or VCP). On Microsoft Windows™,
the system will appear as a COM port, the COM port number can be found in device manager.
On macOS®, a device file is created in the / directory. S is an alpha-numeric serial string unique
Page 12 of 38
. can disable CDP on all ports by inputting the following commands
settings_set sync_chrg 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
settings_set alt_sync_chrg 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
.™ systems and many mobile operating systems such as iOS™ and Android

Communication Interface and Protocol

. can then modify and re-issue in entirity
. were connected to the host computer's USB port
settings_unlock
settings_reset
reboot
(" 0 0 0\nreboot

Data Transfer

5.2.3
5.2.4
to each device
dev/tty.usbserial S /
SS15