Cleaning Your Ss15 - CAMBRIONIX SuperSync15 User Manual

Cleaning the product is generally not required, although in some instances it may be necessary
if excess dirt/ dust/ hair has accumulated, or if minor liquid spillages have occurred on the
If there is a dirt/ spillage over a ventilation slot, external data/ power
connector or product aperture, please remove power from the unit without
Ensure that the product is switched off and the power cord is removed from the product.
Hold the power cable by the plug and do not touch either the plug or the power cord
Wipe the product with a clean, dry and soft cloth. Do not use detergents which contain
alcohol, solvent or surface-active agents. Do not spray water or detergent directly onto
Wet a soft and dry cloth in water and wring thoroughly to clean the product as required
Reconnect the power cord and use your product as advised once cleaning and drying is
Page 24 of 38
CAUTION
Electric shock or personal injury may occur
touching the liquid and contact Cambrionix immediately
with wet or damp hands as an electrical shock may result
Dry the product thoroughly once the cleaning has finished

Cleaning your SS15

. module during operation or storage
. 5.6
l
l
l
the product
l
l
l
complete
SS15