Basic Operations; Turning On The Power - JVC KD-LH1000 Instructions Manual

1 3

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 9 – 13.
To play a CD,
see pages 14 – 17.
To operate the CD changer,
see pages 30 – 33.
To operate the external component
(Line In), see page 34.
CAUTION on Volume Setting:
Discs produce very little noise compared with
other sources. If the volume level is adjusted for
the tuner, for example, the speakers may be
damaged by the sudden increase in the output
level. Therefore, lower the volume before playing a
disc and adjust it as required during playback.

BASIC OPERATIONS

2
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 18 – 21.)
To drop the volume in a moment
Press
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press
• If you turn off the power while listening to a
disc, CD play will start from where playback
has been stopped previously, next time you turn
on the power.
Note:
When you use this unit for the first time, set the built-
in clock correctly, see page 22.
2 0 0 W
To increase the volume.
To decrease the volume.
Volume level appears
briefly while listening to any
for more than one second.
7