JVC KD-LH1000 Instructions Manual page 21

4
Make adjustments as you like,
referring to the table "Sound
adjustment items."
Buttons used for adjustments
1) Press ¢
the frequency band—Low, Mid, or
High.
2) Turn the control dial to select the
center frequency for the selected
band.
3) Press 5 or ∞ to adjust the level
of the selected band.
4) Press SEL (select) to enter the Q
level (band width) adjustment
mode for the selected band.
5) Turn the control dial to adjust the
Q level for the selected band.
6) Repeat step 1) to 5) to adjust the
other frequency bands.
5
Exit from the sound adjustment mode.
The confirmation message
EQ
E
appears—whether you want to
store the adjustment.
If you want to cancel the adjustments,
press any button other than SEL (select).
20
or 4
to select
6
Select one of the user sound modes
(User 1, User 2, User 3).
7
Store the adjustment in the selected
user sound mode.
Ex.: When you select "User 1"
Sound adjustment items
Band
Low
50 Hz
Center
80 Hz
frequency
120 Hz
Q1 (min.)
Q
|
(band width)
Q4 (max.) Q2 (max.)
–06 (min.) –06 (min.)
Level
|
+06 (max.) +06(max.)
Selectable values
Mid High
700 Hz 8 kHz
1 kHz 12 kHz
2 kHz
Q1 (min.)
| (Fixed)
–06 (min.)
| |
+06 (max.)