Selecting Cd Playback Modes - JVC KD-LH1000 Instructions Manual

To select a disc using the disc lists
If you forget what discs are loaded in the CD
changer, you can show the disc title list and
select a disc on the list shown on the display.
• The display can show only six disc names at a
time.
1
While playing a CD, press and hold
5 (up) or ∞ (down) until a disc name
list appears on the display.
Notes:
• If a disc does not have any assigned name, a
disc no. will be shown. (Disc titles of CD text
cannot be shown.)
• The disc name will be shown if the disc has
been played before. In the same manner, "No
Disc" will appear if the unit has detected no
disc in the disc number tray.
2
Press 5 or ∞ to show the other disc
name list, if necessary.
3
Select the number (1 – 6) for the disc
you want to play.
32

Selecting CD playback modes

To play back tracks at random (Random Play)
You can play back the tracks at random.
1
Press MODE (M) to enter the
functions mode while playing a
disc.
"Mode" appears on the display.
2
Press RND (random), while
"Mode" is still on the display, so
that the RND indicator is
highlighted on the display.
Each time you press RND, the
random play mode changes as
follows:
Random 1
Random Off
RANDOM indicator
Ex.: When you select "Random 1."
RND
Mode
Indicator
Random Highlighted
1
Random Flashes
2
When Random Play is turned on, the RANDOM
indicator lights up or flashes on the display.
Random 2
RND indicator
(See the following table.)
Plays at random
All tracks of the current
disc, then the tracks of
the next disc and so on.
All tracks of all discs
inserted in the magazine.