Programming Tips - Pioneer DV-S633A Operating Instructions Manual

Table of Contents

Advertisement

Playing Discs
6 Press ENTER or 3 to start playback immedi-
ately, or PROGRAM to exit if you want to
start playback later.
During program play, you may occasionally see the
start of a chapter that was not programmed when
the chapter number changes. This is not a malfunc-
tion.
For Super VCDs/Video CDs that feature PBC,
make sure that the disc is stopped before you
start.
1 Press PROGRAM.
Program Track
Track
1(/10)
Current:
0.00
Total Time
Move
Play
ENTER
2 Enter the track numbers for your program
list.
For tracks 1–9, use the corresponding number
buttons. For 10 and over, use the +10 button (+10,
+10, 4 for 24, etc.)
• You can program a pause instead of a track/
chapter: press 8 instead of entering a number in
the program list. (A pause can't be the first or
last step in the list.)
• A program list can contain up to 24 steps.
3 Press ENTER or 3 to start playback immedi-
ately, or PROGRAM to exit if you want to
start playback later.
• You can't start playback later with a PBC Super
VCD/Video CD; press ENTER or 3 to start.
Exit
PROGRAM

Programming tips

• To view the program list press PROGRAM.
• To delete a step in the program list,
position the cursor on the title/group/
chapter/track and press CLEAR.
• To insert a step into the program list,
position the cursor where you want the new
step to appear, then enter the title/group/
chapter/track number.
All the following steps move up one.
• To add the currently playing title/group/
chapter/track to the program list, press and
hold PROGRAM for about a second.
If there is no current program list, a new one is
created (for DVD, if the last list created was a
title list then the a title program list is created,
otherwise a chapter program list is created).
• To delete the program list, stop playback
(press 7), then press CLEAR.
The program list is also erased when you remove
the disc from the player or turn the power off
standby
(
).
• To delete a memorized DVD program list,
load the DVD, press PROGRAM, then
change the Program Memory option to
Off. Press ENTER to confirm.
5
25
En

Advertisement

Table of Contents
loading

Table of Contents