Programming (Dvd); Confirming, Adding To And Canceling Programs; To Cancel An Entire Program; Stopping Program Play - Pioneer DVL-909 Operating Instructions Manual

-) -)
Programming (DVD)
_Select the program type
with the number buttons
and press [].
• If you select a title, move directly to step
_, and input the title number
• If you select a chapter, the title number is
indicated, and the chapter input menu is
displayed. If the title number indicated is
the one desired, move directly to step _.
If you want to change the title number,
press the _ button, and then use the
number buttons or _ buttons to
change the number as desired•
9, 7, 18
Press 0.
(_) Program titles or chapters
using the number buttons.
+® +®
]1
When programming +m.e m
............ _----
• Playback starts in the set order.
Confirming, a ddingto
and cancelingprograms
PROGRAm
(_ Press C_.
(_ With DVDs, select the type of
program and press _.
• You can confirm programs by performing
the above operations•
_To add to programs,
make selections with
the number buttons.
_To cancel a program,
select the desired
program with
CLEAR
_and press (_.
Programsetting(Video
CDs,CDs,LDs)
PROG_AU
(_ Press 0-
i
(_ Programming tracks 9, 7
and 18 in order.
Pressthe number buttons in order•
• With double-sided LDs, program the disc
side together with each track number. For
example, for track 9 on side B,
DISC _IOE DISC SlOE
_) Press _.
• Playback starts in the specified track order•
To cancel an entire
program
C_EAR
During STOP, press C_)"
• The entire program for the disc loaded in
the disc table is cleared.
Stopping program play
STOP
Press (_.
• Program play stops
• Youcannot program when playing a Video CD
(duringPBC)
_When moving chapters, a chapter not
programmed
may appearon screen, but this is
not a malfunction.
With DVDs, programming may not be possible
with certain titles In this case, the _ mark is
displayed
• With DVDs, you cannot program chapters that
are in different titles
• You can program up to 24 steps•
• If you press the wrong number button, press
_and then the correct number button
press
• Program play is not possible with discs that
have no cha_ter numbers recorded on them
Pressing _ during programming:
If you press PAUSE instead of a number
button, II is displayed indicating that a pause
has been programmed
[
Playback in a Desired Order
_VRR11R6>