Using Repeat Play - Pioneer DV-S633A Operating Instructions Manual

Playing Discs
REPEAT
REPEAT
A-B
5 5 ¶
¶
2
∞
3
7
STOP PLAY
¶
CLEAR
¶
Î

Using repeat play

You can set the player to repeat individual tracks on CDs or
Super VCDs/Video-CDs, chapters/tracks or titles/group on DVD
discs, or the whole disc. It's also possible to loop a section of a
disc.
You can use the repeat together with the programming mode to
repeat the tracks/chapters in the program list (see page 24 for
how to make a program list).
You can't use any repeat mode or looped play with a Super
VCD/Video CD playing in PBC mode.
Note
• You can't use repeat and random play at the same time.
• If you switch camera angle during repeat play, repeat play is cancelled.
1 Press REPEAT during playback to select a repeat mode.
Each press switches the repeat mode:
• Repeat Chapter/Track
• Repeat Title/Group
• Repeat Off
• Repeat Track
• Repeat All
• Repeat Off
2 To resume normal playback, press CLEAR.
Tip
You can use repeat play with program play. During program play, press
REPEAT.
Looping a section of a disc
1 Press REPEAT A-B once at the start of the section you want to
repeat, then again at the end.
Playback immediately jumps back to the start point and plays the loop
round and round.
• On a DVD disc, the start and end points of the loop must be in the
same title/group.
2 To resume normal playback, press CLEAR.
• You can also repeat a section of a disc just once by pressing 3 to
mark the end point (instead of A-B).
5
27
En