Resetting The Player - Pioneer DV-S633A Operating Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Additional Information

Noticeable difference in DVD and CD volume.

• DVDs and CDs use different recording methods.

This is not a malfunction.

Cannot play multi-channel audio

• Make sure that 5.1 Channel is selected in the Audio

Out menu (page 39).

• Check that the settings in the Speaker Setting screen

are correct (page 40).

• Check the audio options available from the disc's

menu.

No digital audio output

• Check that Digital Out setting is set to On (page

38).

• Some DVD-Audio discs prohibit digital audio output.

Cannot output 192kHz or 176.2kHz digital

audio.

The player does not output digital audio at these

sampling rates.

Cannot output 96kHz or 88.2kHz digital audio.

• Check that the Linear PCM setting is not set to

Down Sample On (page 37).

• Some discs are digital copy protected and do not

output high sampling rate digital audio.

No DTS audio output.

• If this unit is connected to a non-DTS compaible

amplifier or decoder using a digital audio cable, set

DTS Out to DTS 3 PCM in the Setup menu. If you

do not do this, noise will be output if you try and play

a DTS disc.

• If this unit is connected to a DTS-compatible amplifier

or decoder using a digital audio cable, check the

amplifier settings, and that the cable is properly

connected.

Audio mix does not sound right or sounds

incomplete (for example, inaudible dialog).

• Incorrect Setup menu settings.

Make sure that 2 Channel output is selected for

the Audio Out menu option if you've connected

to the stereo inputs on your amplifier or TV (page

39).

• If the power is switched off before exiting the Setup

menu, the settings are not stored.

Make sure that you exit the Setup menu after

changing any settings before switching off.

The disc containing the MP3 tracks won't play.

• If the disc is a recordable CD, make sure that the disc

is finalized. If the message 'UNPLAYABLE MP3

FORMAT' is displayed when you try to play a disc/

track:

Check that the track(s) are in the MPEG1 Audio

Layer 3 format.

Check that the sampling rate of the track(s) are

44.1 or 48kHz.

Some MP3 tracks appear to be missing from a

disc.

• If a track name does not end in ".mp3" or ".MP3", this

player will not recognize it as an MP3 track.

• This player only recognizes the first 250 folders and

tracks on a disc. If there are more folders/tracks than

this, you will not be able to play them.

• This player is not compatible with multi-session discs.

If the disc is multi-session, you will only be able to

play tracks recorded onto the first session.

The audio recorded on the disc is not output

properly.

• If the audio is switched to [2] when playing a Super

VCD that contains only one stereo soundtrack, there

may be no sound at all. To restore the sound, return

the AUDIO button back to its original position (page

23).