Omron V640 Series Operation Manual page 39

Write Data Designation Area
Item
Offset
Length
Maximum byte of CID
Write Data Designation
Area
Repeat
Command
Communications Results
Display Area
Execution example
For example, the results display would be as shown below if a CID read was executed with "an offset
of 0, a length of 16, and a maximum bytes of CID of 16".
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)
Communications Results Display Area
Description
Specify the CID offset between 0 and 15 bytes.
Specify the CID length between 1 and 16 bytes.
Specify the maximum CID length between 1 and 16 bytes.
For the write data, specify only the number of bytes for the specified
Length.
Check this box if the program is to be run repeatedly.
Commands actually sent to the amplifier unit are displayed.
Transmitted and received data to the amplifier unit are displayed.
TX: The data transmitted toward the amplifier unit is displayed.
RX: The data received from the amplifier unit is displayed.
3 V640 Utility Tool Features
CID Read Button
CID Write Button
Repeat
Comments
Specify only visible ASCII
characters.
3
3-7