No.3 And No.4 - Kyocera KM-5530 Operation Manual

(3) Loading paper into drawers[cassettes] No.3 and
No.4
Up to 1000 sheets of 11" x 8
1/2
2 2
(75 g/m – 80 g/m ) or color paper can be loaded into
drawer[cassette] No.3 (right side drawer[cassette]). Drawer[Cassette]
No.4 (left side drawer[cassette]) can accept up to 1500 sheets of that
same size paper.
IMPORTANT!
The type of paper loaded in each drawer[cassette] must be specified
under "Paper type (drawer[cassette] No.1 - No.5)" on page 7-24.
1 Pull the drawer[cassette] out toward you as far as it will go.
2
Align the paper flush against the right side of the
drawer[cassette], and then set the paper in the
drawer[cassette].
" or A4 size standard copy paper
IMPORTANT!
• Make sure there are no folds, etc., in the paper you load into the
drawers[cassettes]. Folds, etc., can cause paper jams.
• DO NOT load more paper than is indicated by the sticker located on
the inside of the drawer[cassette] (shown as 1 in the illustration).
• When you are loading paper into the drawer[cassette], make sure
that the side to be copied onto is facing downward. (The copy side is
the side facing upward when the package is opened.)
3 Insert the appropriate paper size label into the front of the
drawer[cassette] to indicate the size of paper that is loaded
into that drawer[cassette].
4 Gently push the drawer[cassette] back in.
NOTE
If you will not be using the copier for a prolonged period of time,
remove all paper from the drawers[cassettes] and seal it in its original
packaging in order to protect it against moisture.
Section 3 PREPARATIONS
1
3-3