1-4-3 Image formation problems
If the part causing the problem was not supplied, use the unit including the part for replacement.
(1) No image
appears (entirely
white).
See page 1-4-9
(6) Black streaks
are printed verti-
cally.
See page 1-4-11
(11) Offset occurs.
See page 1-4-13
(15)Spots in the printed objects.
See page 1-4-14
(2) No image
(3) Part of image is
appears (entirely
black).
See page 1-4-9
(7) White or black
(8) Spots are
streaks are
printed horizon-
tally.
See page 1-4-11
(12)Fusing is loose. (13)Faint or blurred
See page 1-4-13
(4)
missing.
See page 1-4-10
See page 1-4-10
(9) Printing incom-
printed.
See page 1-4-12
See page 1-4-12
(14)Dirt on the top edge or back of the
printing.
See page 1-4-13
1-4-8
(5) White streaks
Gray background.
are printed verti-
cally.
See page 1-4-11
(10)Paper is wrin-
plete or out of
position
See page 1-4-12
paper.
See page 1-4-14
2M2/2M3
kled.